What are the characteristics of vacuum atomization?
The above-mentioned various nozzle atomization mechanisms have shortcomings and even self-contradictory. However, most scholars, such as others, still support more about the aerodynamic interference. The hypothesis is more fully developed than others, and basically explains the reason why the low-speed jet is broken and split into water mist, so that the high-speed jet can be inferred as the basic atomization mechanism.
Industrial precision atomizing nozzle, mainly used to spray an industrial nozzle type! Precision atomizing nozzle is a high pressure atomizing nozzle! In the absence of compressed air. The high pressure principle is manipulated to atomize the droplets. The resulting particle size of 1050 microns droplets, used for humidification, dust, elimination, cooling, spray, precision atomization nozzle is divided into single-head precision atomization nozzle and multi-head precision atomization nozzle! Let's take a look at the single-head nozzle and many more....
The high-pressure spray cooling system is a system that uses a high-pressure atomizing host to transport the water that has been precisely filtered to a special high-pressure pipe network for making fog (pressure resistance 14MPa), and reaches a special nozzle for making fog to spray into fog. The pressurized water is atomized by a professional nozzle through a high-pressure delivery pipeline to produce micro-mist particles of 0.10 to 15 μm, so that it can quickly absorb heat from the air to complete vaporization and diffusion, thereby completing the air humidification and cooling purposes.
So as to achieve the effect of rapid cooling. Hotel spray cooling is based on the principle of natural climate regulation of water. The water mist absorbs a large amount of heat during the vaporization process, and the water is sprayed in a small atomized state through the atomized cooling system. Accelerate the air flow, fully mix with the air, and use the vaporization cooling method to neutralize the excess positive ions in the air will increase the content of negative ions in the air. Remove impurities from the air. In daily use and maintenance, the use of microcomputer control, can display the current overall environmental humidity value, so that we better spray humidification.
1. The energy-saving method of atomizing 1 liter of water per hour only consumes 4 watts of power! And the power of the gas-water mixing humidifier! It is the 1/100 of the power of the traditional steam humidifier! The pressurized water is atomized by a professional nozzle through a high-pressure delivery pipeline to produce 010 ~ 15μm micro-mist particles, so that it can quickly absorb heat from the air to complete vaporization and diffusion, thereby completing the purpose of air humidification and cooling.
Guangdong Denitration Squeeze Address (Brief Analysis 2022 Updated) sIZtOe-"No need to use compressed air, very fine hollow cone spray can be formed under the condition of liquid pressure, and the spray particles are evenly distributed! Wide range of pressure and flow. Fine atomized particles can form a good mist spray effect. In order to use a wide range of water mist nozzle types of design, there are wall-mounted water mist nozzle can be used for exterior walls! Container and pipeline installation, disk core, filter easy to disassemble, for detection and cleaning, water mist nozzle is basically equipped with built-in filter, can effectively prevent the nozzle clogging. Nozzle representative type"
Disclaimer: The content is forwarded from the Internet, and this website does not own the ownership and does not bear the relevant legal responsibility. If you find that this website is suspected of plagiarism, please go to contact us to report, and provide relevant evidence, once verified, this site will immediately delete the suspected infringing content.