+
  • 旭瑞合金.jpg
  • 1(2).jpg
  • 4.jpg

水气联合雾化


优势一、生产成本低,适合量产及研发应用;优势二、适用范围广,可以制备绝大多数金属及其合金的粉末;优势三、由于气体介质的加入,可减缓液滴冷却速度,有利于液滴球型化,因此可以制备高松比亚球形粉末或球型粉末。优势四、可通过调整工艺制得较细粉末(D50可达到5-10μm),满足对超细粉末的使用要求。1、Lowproductioncost,suitableforbatchproductionandresearchapplication;2、Widescopeofapplication,powdersofmostmetalsandtheiralloyscanbeprepared3、Duetotheadditionofgasmedium,thecoolingrateofdropletscanbesloweddown,itisadvantageoustothespheroidization   ofdroplets,soitispossibletopreparesub-sphericalpowderorsphericalpowderwithhighsonobiosity.4、Finerpowdercanbepreparedbyadjustingtheprocess(D50canreach5-10um),meetingtherequirementsfortheuseof   ultrafinepowders。

Product Introduction

优势一、生产成本低,适合量产及研发应用;

优势二、适用范围广,可以制备绝大多数金属及其合金的粉末;

优势三、由于气体介质的加入,可减缓液滴冷却速度,有利于液滴球型化,因此可以制备高松比亚球形粉末或球型粉末。

优势四、可通过调整工艺制得较细粉末(D50可达到5-10μm),满足对超细粉末的使用要求。

1、Low production cost,suitable for batch production and research application;

2、Wide scope of application,powders of most metals and their alloys can be prepared

3、Due to the addition of gas medium, the cooling rate of droplets can be slowed down,it is advantageous to the spheroidization

   of droplets, so it is possible to prepare sub-spherical powder or spherical powder with high sonobiosity.

4、Finer powder can be prepared by adjusting the process(D50 can reach 5-10 um),meeting the requirements for the use of

   ultrafine powders。

Production strength

Production workshop
Appearance of the factory
Appearance of the factory
Appearance of the factory
Appearance of the factory
Appearance of the factory

Key words:


Previous:

Next:

Online consultation


Product Name:

Submit

Message


To provide you with quality products and services